¡¡ Introduction Products Order Online Contact Us ¡¡ E-mail ¡¡ ÖÐ ÎÄ ¡¡
¡¡
Homepage
Introduction
Products
  SEAL GASKET
  SEALING PACKING
  SEALING SHEET
  SEALING BELT
  SEMI-MANUFACTURED
    GOODS
  OTHER PRODUCTS
Order Online
Contact Us
E-mail

 

> GRAPHITE SHEET WITH METAL REINFORCEMENT > SPIRAL WOUND GASKET > SERRATION PEAKS GASKET
> PTFE GASKET > ASBESTOS AND NON ASBESTOS >
DOUBLE JACKETED GASKET


Serration peaks gasket

  

    Ret ring with concentric serrations made of various types of metal. Serration peaks gasket was used when bolting force is not sufficient to seal a flat gasket, because it contacts flange face only at serration peaks. Commonly used on valve bannets and flanges attached to equipment. 3 types of cross section as per right table are available.

Serration peaks gasket Festures:
(1) Serration peaks gasket is suitable for high temperature and high pressure application.
(2) High corrosion resistance.
(3) Constant and teliable sealing.
¡¡
Serration peaks gasket Application
(1) Working temperature:650¡æ
(2) Working pressure:6.4 to ¡¡¡¡¡¡¡¡¡¡25.0 MPa
(3) Minimum pre-tightening ¡¡¡¡¡¡¡¡¡¡specific pressure: y=70MPa
(4) Gasket coefficient: m=4.25
Note:Besides the Sample stuffing and spacer listed machining products pamphlet. Our factory also engages in manufacturing of other kinds of materials of stuffing, spacer and semi-products machining products machining products. If you require these products please contact with our factory.
Copyright © Cixi Sunway Sealing Material Factory.
Office Add
£ºNo.208, Fumin Road, Shengshan Industry Zone, Cixi City, Ningbo, Zhejiang, China.
Tel
£º+86-574-63892508  Fax£º+86-574-63891398  P.C£º315323  E-mail£ºshenwei@seal-material.com